SHENZHEN SUNKAX TECHNOLOGY LIMITED  

Product Name: MPPT Hybrid off-Grid Solar Inverter with PV / AC Priority Optional Model NO.: SHG-5000 Type: DC/AC Inverters Nature of Wave String: Sine Wave Inverter Circuit Topologies: Push-Pull Type Output Type: Single Grid Type: off-Grid Inverter Output Power: >1000W Certification: CCC, CE Nature of Source Flow: Passive inverter Power Source: Solar Power AC Inptut: 140VAC~275VAC Battery DC: 24VDC AC Output: 230VAC AC Charger: 10A Max PV Input: 24-50VDC PV Charger: 40A Max Wave: Pure Sine Wave Protections: Deep Discharge, Overcharge, Short Circuit etc Application: Solar System Trademark: SUNKAX or OEM Transport Package: Carton Box Specification: 3500W Origin: China HS Code: 8504403090 Product Description Salient Features: Pure sine wave output, strong compatibility, which can be connected with refrigerators, electric fans, televisions, fluorescent lamps etc, without damage for loads. C.R.G.O Toroidal transformers technology , more reliable, Low static loss Double CPU intelligent control, high performance MPPT solar charging technology, more efficient With wide frequency range, auto-tracking for main frequency and inverter output 50/60Hz Intelligent selection between main mode and solar mode, more energy-savingFull range of automatic protections & alarm: overload, short circuit, overvoltage, under voltage, high temperature etc. Friendly display interface, clear working statusModel500VA800VA1000VA1500VA2000VA2500VA3000VA5000VAPower Capacity300W500W700W1050W1400W1800W 2100W3500WBattery voltage12Vdc12Vdc 12Vdc 24Vdc 24Vdc 24Vdc 48Vdc48VdcWorking modePV(Photovoltaic priority) / AC(AC priority)OptionalPVInput voltage range12Vdc-25Vdc24Vdc-50Vdc48Vdc-90VdcMax. charge current10A/20A/30A//40A OptionalAccording to print on machine60AMax. Conversion efficiency98%DisplayPanel indicator lightLED Graphic Screen LED lightsMains status(Optional)Input voltage range140Vac~275VacInput Frequency range45-65 Hz(Automatically transfer to inverter power when over frequency)Output voltage range190Vac~245VacInput PF.(AC/DC)98%EfficiencyMains mode≥ 96%Charge current10A/15A/20AMains overloadwarning until decrease loadShort circuitYesInverter outputInverter output voltage220V±3%Output frequency50 Hz / 60Hz ± 0.3Hz frequency adaptiveOutput power factor≥0.8Wave form distortionLinear load≤ 3%PV-AC transfer time4Ms typical value Max.6 MsEfficiencyInverter mode≥ 80%Inverter overload110%-130% shutdown at 30s,130%-150% shutdown at 3s Short circuit Systems automatically shut downAlarmMains abnormal1time/1S, silence auto after 5S Low battery1time/1S and flash battery last gridOverload1time/ 1S and display "overload" gridCommunication interfaceRS232(Optional)OthersOutput socketsUniversal sockets / customizedSurge protectionOptionalAmbient temperature0ºC ~40ºCAmbient humidity10% ~90%(Non Condensed)Noise≤ 50dB Remark: the solar panel power configuration is related with the inverter working mode and charging current, we suggest match the PV power according to projects needs. ON/OFF Instructions 5.1 AC priority 1) On: When Mains is normal, inverter will start normally into AC mode, and at the same time will charge the battery; when the Mains is abnormal or no input , press the button "ON" in 3 seconds, it will start and go into Inverter mode, when mains recover, it will automatically switch to AC mode, and charge the battery 2)Off: Press the shut-down ("OFF") in 3 seconds, it will cut off the output, in AC mode, it will continue to charge the battery and not switch to inverter mode again. 5.2 PV Priority 1)On: When press the start button ( "On") in 3 seconds, or inverter starts automatically when Mains recover, If battery is full enough, then it will switch to battery mode , and supply power to loads ( Mains as a stand-by) 2) Off: When inverter shut down and cut off the output, it will not switch to the inverter mode. Note: currently in inverter mode, if AC input is high voltage it need cut off the mains to shut down; When AC input voltage is low, it can switch to Mains mode after shut down and no output. 3) Switch between Mains & invert mode : in Mains, when it shut down, it can not switch to inverter mode. When system start, if Mains is abnormal or battery is charged full enough by the solar panel, it will switch to inverter mode. Under this, when battery is low voltage it can switch to mains mode automatically. 5.3 Turning on steps; Please ensure the battery connecting properly ( positive/ negative and voltage parameters consistent with the product identification), and then turn on the battery switch Please ensure the solar panel connecting properly ( positive/ negative and voltage parameters consistent with the product identification), and then turn on the solar input switch Press the button "on/off" in 3 seconds, and start the inverter Turn on the solar panel input switch , and it will charge automatically Connect the mains properly, after the inverter starts normally, and then start the mains switch After 30 seconds, inverter will output normally and connect the loading, then start the loads one by one. 5.4 Turning off steps: Turn off the loads one by one Press the shut-down ( "Off ") manually in 3 seconds, and cut the output Unplug the power cable or connector cable, cut off the Mains input ( if no need Mains charging) Turn off the switch of solar panel on the real panel ( If no need Solar panel charging ) Turn off the switch of battery on the real panel ( if no need charging )